Re-insert the memory card, wait 30 seconds and switch the car engine on again. To reset your device, switch off the car engine and then remove the memory card. TomTom Mazda Navigation System NB1 LIVE / Carminat TomTom / TomTom Smart Media-System Push the navigation module back into the cradle. Then press the reset button on the back of the navigation module for at least 20 seconds. To reset your navigation module, first remove it from the cradle by pressing the release button. The reset button is on the bottom of your device.

Use a straightened paper clip, or something similar, to push the reset button for 20 seconds.

Pull the back cover off the device by holding either side of the cover and pushing the device through the centre of the cover.

Mod edit: Machine translated Dutch Tagged. According to the manual it should work, but nothing appears.

Remove the Mount from the device by pressing the release button on the Mount. I recently got a new TomTom, the TomTom Go Classic, and now I had a separate TMC receiver with my old TomTom Via 135, I connected it to the new one, but I do get a message that it is connected, but the traffic jam messages do not appear.

If you have a TomTom START (2009) or a START² / START Classic (2010), do the following:

If your device uses an SD card, insert the SD card. Press the On/off button for at least 5 seconds. Use a straightened paper clip, or something similar, to push the reset button for 20 seconds.

If your device uses an SD card, remove it. Make sure the charging light on your device is on. Check that the battery is charged properly.Ĭharge your device for at least 2 hours before trying to turn it on again.To reset your TomTom device, do the following:

Tomtom go not holding charge